HP (Hewlett-Packard)
Hewlett Packard is a printhead suitable for marking almost any product at high resolution.
Click on the Direct Sales Button, and contact us today to order your HP inkjet thermal inks.
- very high reliability and safety under operational conditions
the cartridge and the complete printhead are exchanged simultaneously.
This guarantees consistent typeface quality.
- high printing speeds in barcode quality
up to 180 m/minute at 300 dpi resolution (maximum 300 m/minute)
- brilliant print image
with ink cartridges (thermo inkjet) of consistent quality, up to 600 dpi resolution (at 45 m/minute), achieved by ejecting tiny, accurately placed droplets from hundreds of minute nozzles at very high frequency.
- maintenance-free and simple operation
with patented Click´n Print cartridge replacement system. Cartridge installation is clean and simple. - high flexibility
by deploying several HP printheads. Print heights of maximum 12.5 mm to 100 mm are possible, and layouts are freely configurable. Multi-sided coding of packaging on two sides (top, side or at different production lines). Virtually all porous and non-porous surfaces can be marked, depending on ink type. Distance of printhead to product surface ranging from 0.5 to 5 mm. - highly economical
low operating costs but also high availability through simple and clean ink exchange, zero maintenance, immediate write response and uninterrupted operation. - simple installation
by dint of very compact design, with 3 different printhead types available
Adobe Reader is required to open and view PDF files. This can be downloaded free from adobe.com.
Available Documents
ULTRAPRINT – High durability resin
ULTRAPLATE is the standard resin ribbon from Weber. It is dedicated to
applications requiring a perfect printing quality and excellent mechanical
resistances. Its high versatility (it also prints on coated papers) and its
performances (sharpness, printing speed) have resulted in making
ULTRAPLATE a market reference.
Markoprint NonStop Printing
To enable continuous marking in ongoing production, our Markoprint NonStopPrinting printhead holds two alternately printing cartridges. Because the other ink cartridge is printing on the same position, each ink cartridge can be changed, cleaned, or serviced without pausing the machine.
An intelligent automatism prevents both cartridges from going empty at the same time. The first cartridge will always print two consecutive print jobs, taking turns with the second cartridge, which will only print one. This sophisticated automatism avoids both cartridges from running out at the same time. This will keep the ink from drying out in both cartridges. When the cartridge with the larger print volumes is empty, a warning will show, and the other cartridge will continue printing until it is replaced. The new cartridge will print the lower quantities to allow for you to replace the “older” cartridge. A sophisticated workflow that will boost your efficiency and productivity.
View ProductMarkoprint Shutter Printhead HP
Inkjet nozzles can clog and dry up in a dusty printing environment, which is typical in wood-processing enterprises and other sectors. This results in poorly printed images. Our Markoprint Shutter Printhead HP prevents dust from entering the ink cartridge or gathering on the nozzles. During a production halt, the printhead automatically retracts the cartridge and shuts the open nozzle plate. After being paused for even several days, it is instantly ready to print again.
View ProductGeset 111 Top Labelling System
The Geset 111 labelling system is used to label square products on the top side automatically. Depending on the type and dimension of the product, different label sizes are used. The products are fed manually or by a conveying system provided by the customer at an infeed passage on the labelling system. Care should be taken on accurate alignment of the products. It is essential that the products are forwarded separately to the applicator with a gap between each other.
When the barrier is reached, an application trigger is tripped. The label applicator applies a label on the product in Wipe On procedure. The label on the top side is pushed on to the product by a brush or roller. After labelling, the products move on and can be removed from the conveyor by the customer.
View Product
