Bottle-Matic Label Applicator

This table top labelling system is deal for applying single pressure-sensitive labels to cylindrical objects like bottles and cans. These are perfect for small craft brewery or vineyard labelling applications.

The Bottle-Matic label applicators are available in 10″ wide and 16″ wide models that fit most products. The unit is fully adjustable so you can label objects from 0.5″ to 10″ diameter; ideal for everything from test tubes to 1.5 gallon bottles.

Contact Us Download Brochure
traceability solutions

Bottle-Matic Label Applicators

Bottle-Matic bottle labellers enable you to label all kinds of cylindrical objects by simply inserting the container and depressing a footswitch. Labels are applied at over 4.5″ per second – most water bottles are labelled in less than two seconds. The operator then removes the bottle and inserts another to start the procedure again. After a rhythm is established bottles can labelled very quickly.

The Bottle-Matic comes in two sizes: Standard 10″ wide and the larger 16″ wide version for taller products. Both can handle products up to 10″ in diameter.
Bottle-Matic label applicator
• Label objects from 0.5″ to 10″ diameter; ideal for all round containers from water bottles to paint jars and cosmetics.

  • Accurate: Maintains 0.0625″ side-to-side accuracy on most containers.
  • Labels cylinders to 15″ in length (or longer if the item has a neck).
  • Able to handle most tapered containers by simply adjusting the idle roller position.
  • Labels over 1000 pieces per hour with average dexterity.
  • Side frames are laser cut from quality steel, then formed, countersunk, deburred and inspected.
  • Dispensing tables are formed out of 6061-T6 aluminium. Its peel edge is hand- milled to spec within .001″.
  • Dispensing tables are polished with ultra-fine polishing compound so paper flows freely around the plate.
  • Bottle-Matic uses dual AC-shaded pole gear motors.
  • Micro-switch activated; will work on all kinds of labels.
  • Modifications are available for those hard-to-label containers.

 

Adobe Reader is required to open and view PDF files. This can be downloaded free from adobe.com.

Available Documents

    Markoprint Integra Ultimate

    The innovative Integra Ultimate thermal inkjet printer not only provides IP65 protection against dust and moisture, but it also closes and cleans the nozzle plate at each pause. This system ensures that the printing is always clean, with faultless results even after extended breaks. As a result, the ink cartridges’ open times are multiplied many times. Two HP Class thermal inkjet ink cartridges can be used with the print head. As a result, the system produces beautiful prints with a maximum height of 25 mm.

    View Product

    Markoprint Integra One

    Labeling systems are not always easy to integrate into preexisting production lines. The Markoprint Integra One can be easily integrated into production processes thanks to its compact dimensions of 186 x 86 x 98 mm. The printing system has a display for data entry as well as system settings modification and verification. This information can also be viewed from mobile devices if the WLAN version is selected.

    Inkjet printers should be properly protected if they are subjected to harsh manufacturing circumstances. In addition, the Markoprint integra One ip has an IP 65 protection rating. As a result, it’s ideal for use in the food industry.

    View Product

    Markoprint Integra PP 108

    The Markoprint Integra PP108 is the first inkjet printer with SEIKO printing technology and a circulating ink system. It features a POZIFLOW circulating ink system which prevents the accumulation of air in the nozzles and ensures a permanent, clean print image without missing print due to blocked nozzles. The system’s ink tank can be installed above, below, or at the same height as the print head without any problems. The new SEIKO printhead has a print height of 108 mm and achieves a remarkable speed of up to 150 meters per minute with a high resolution of 360 dpi.

    Suited to Dual Colour Printing Applications such as Hazard Labelling, Dual Colour overprinting and Direct Printing Applications to corrugate, and web printing applications, the PP108 is the latest high end, economical Inkjet System using the latest Drop on Demand Printing Technology.

    View Product

    Markoprint Shutter Printhead HP

    Inkjet nozzles can clog and dry up in a dusty printing environment, which is typical in wood-processing enterprises and other sectors. This results in poorly printed images. Our Markoprint Shutter Printhead HP prevents dust from entering the ink cartridge or gathering on the nozzles. During a production halt, the printhead automatically retracts the cartridge and shuts the open nozzle plate. After being paused for even several days, it is instantly ready to print again.

    View Product
Product Enquiry Form