Epson C7500 High-Speed Inkjet Colour Label Printer
The Epson C7500 inkjet label printer is a fast, full-colour label printer whose rugged design allows minimal maintenance, low cost of ownership, and is ideal for busy, on-demand labelling environments.
The Just-in-Time Colour printing lets you print the labels you need, when you need them, quickly and economically. The C7500 uses durable inks that won’t smudge, smear or fade. And the highly durable labels are up to 50% lower in cost than laser or thermal-transfer printed labels.
Features include:
• PrecisionCore TFP printing with Nozzle Verification Technology
• BS-5609 certified for durability
• Prints labels up to 4.1″ wide
• Uses high-yield ink cartridges that are easy to change
• Fast print speeds of up to 11.8″ per second
• Optional label rewinder for distributed applications
High-speed colour label printing
If you are looking for high-speed, in-house on-demand colour label printing, the Epson C7500 is for you. With durable smudge-resistant inks, this printer can crank out labels at up to 11.8″ per second.
Its astounding image quality is a result of the PrecisionCore inkjet technology that Epson uses to deliver precise barcodes and ultra-sharp text. And the built-in Nozzle Verification technology constantly checks for clogged nozzles and halts printing to clean nozzles when needed.
The highly efficient printer uses high-yield ink cartridges so there are fewer interruptions and less down-time during print cycles. The ink cartridges are easy to replace and a lot simpler to use than thermal-transfer ribbons or laser toner. The C7500 is up to 50% lower in printing costs versus laser or thermal-transfer printers printing the same labels.
With the built-in ESC/Label language capabilities, you can use the printer with your existing workflows and even add colour with simple programming extensions.
Adobe Reader is required to open and view PDF files. This can be downloaded free from adobe.com.
Available Documents
Epson C7500 High-Speed Inkjet Colour Label PrinterMarkoprint Integra Ultimate
The innovative Integra Ultimate thermal inkjet printer not only provides IP65 protection against dust and moisture, but it also closes and cleans the nozzle plate at each pause. This system ensures that the printing is always clean, with faultless results even after extended breaks. As a result, the ink cartridges’ open times are multiplied many times. Two HP Class thermal inkjet ink cartridges can be used with the print head. As a result, the system produces beautiful prints with a maximum height of 25 mm.
View ProductMarkoprint Integra One ip LX
Unleash the Power of Proven Washdown Technology (IP Protection) for Seamless Performance in Complex and Demanding Applications. Experience High-Speed Printing and Effortless Operation with Up to 10 mm Print Distance. Discover Impressive Innovations, including a Patented Mechanism for Secure Ink/Printhead Unit Hold, Setting a New Standard in Printing Excellence.
View ProductMarkoprint ZTV HP
The Markoprint ZTV HP is a Central Ink Supply (CIS) system stores up to 400ml of ink for Markoprint HP Class inkjet printing systems such as the Markoprint integra One, Markoprint X2JET / X4JET, and Markoprint integra Quadro.
The large ink tank prevents frequent cartridge replacements from lowering your Overall Equipment Effectiveness (OEE). It can hold up to four single HP cartridges repaying you rapidly thanks to reduced ink prices. For non-interrupted production, the system can be paired with our NonStopPrinting printhead. Using an interface directly on the cartridge, current ink filling levels are monitored in real time. When the levels in the bulk tank fall below a certain threshold, a valve to the bulk tank opens and automatically refills it.
View ProductGeset 112 Bottom Labelling System
The Geset 112 labelling system is used to label square products on the bottom side automatically. Depending on the type and dimension of the product, different label sizes are used. The products are fed manually or by a conveying system provided by the customer at an infeed passage on the labelling system. Care should be taken on accurate alignment of the products. It is essential that the products are forwarded separately to the applicator with a gap between each other.
When the light barrier is reached, an application trigger is tripped. The label applicator applies then in Wipe On procedure a label onto the product. The label on bottom side is pushed on the product by the self-weight of the product. After labelling the products move on and can be removed from conveyor by the customer.
View Product
